On 20 November 2026 the US Federal Aviation Administration (FAA) published a final rule adopting an airworthiness directive for Airbus Helicopters Deutschland EC135 helicopters and the EC635T2+ (AD 2026-23-03, signed 5 November 2026). It followed a report of a separated tail rotor blade assembly, caused by a crack that began as intergranular corrosion.
What the source reports
The directive requires repeated crack inspections of a certain tail rotor blade assembly. A cracked assembly must come out of service, and fitting a replacement part ends the repeat inspections. The European Union Aviation Safety Agency (EASA) AD 2026-0031 of 19 February 2026 records increased tail rotor vibration from a crack, and the manufacturer's decision to stop using dye penetrant at increased temperature (Method A).
Airbus Helicopters told the FAA that intergranular corrosion cannot be reliably detected. It ran fatigue tests on blades with corrosion introduced on purpose, then crack-propagation tests, and set inspection intervals of 20 hours or 30 hours depending on the model. The FAA noted that campaigns completed without finding cracks do not support longer intervals. It estimates 359 helicopters on the US register are affected.
What it means for asset owners
The permitted method depends on the part's inspection history: type II visible dye, eddy current or fluorescent penetrant. The FAA notes that ASTM E1417 prohibits type II visible dye penetrant before fluorescent penetrant on the same surface, and that cleaning before and after inspection affects what a penetrant can show.
In our view, the same questions apply to pressure equipment. What is the smallest defect your method can find, and has an earlier step reduced that ability?
Source: US Federal Aviation Administration, Federal Register, 20 November 2026.